Removing an Expansion Card
Follow this general procedure to remove an expansion card:
1.If you are removing a
See Chapter 3, “Using the ISA Configuration Util- ity,” for instructions.
2.Remove the computer cover according to the instructions in “Removing the Computer Cover” in Chapter 5.
CAUTION: See “Protecting Against Electro- static Discharge” in the safety instructions at the front of this guide.
3.If necessary, disconnect any cables connected to the card.
4.Remove the
5.Unscrew the mounting bracket of the card you want to remove.
6.Grasp the card by its outside corners, and ease it out of its connector.
7.If you are removing the card permanently, install a metal filler bracket over the empty
NOTE: Installing filler brackets over empty card- slot openings is necessary to maintain Federal Com- munications Commission (FCC) certification of the system. The brackets also keep dust and dirt out of your computer.
8.Replace the
9.Replace the computer cover, reconnect your com- puter and peripherals to their power sources, and turn them on.
Adding Memory
Memory can be increased to a maximum of 384 mega- bytes (MB) by installing combinations of
Your system can support both error checking and correction (ECC) and
DIMMs (3)
DIMM sockets
