
Remote Controls
Improving Receiver Control
Installing a UHF Attenuator
Unwanted UHF signals may interfere with signals from the remote control to the receiver. To prevent such interference, you can install a 10 dB attenuator (available from many consumer electronics parts stores). Adding this attenuator will help keep out stray UHF signals, but it will also cut down how far away you can use the remote control.
1Remove the remote control antenna from the REMOTE ANTENNA input on the receiver’s back panel.
2Attach a 10 dB attenuator to the REMOTE ANTENNA input.
3Attach the remote control antenna to the attenuator.
75