Remote Controls
Controlling Other Components
Setting Up Using Device Code Tables
Set up the remote to control other devices using the device codes listed on page 137. In the instructions below, the column on the left contains the instructions and the column on the right provides additional information.
Instructions | Additional Information |
1Turn the device on.
2Find the brand name of the device in the tables starting on page 137.
3Press and hold the mode button until all the other mode buttons light up, then release the button. The mode button flashes.
4For AUX mode only. Press 0 for a TV, 1 for a VCR, or 2 for a tuner or amplifier.
5Enter one of the
6If you want to program Limited Mode, press 1. If not, skip to step 7.
Use the device’s front panel buttons or its remote control.
If the brand isn’t listed, see Setting Up Using Device Codes Scan on page 78.
For example, for a TV, hold the TV mode button until all of the other mode buttons light. When you let go, TV will flash.
If you’re not programming in AUX mode, skip to step 5.
The
See Limited Mode for more information.
7Press POUND (#).
8Press POWER to turn off the device. If the device does not turn off, go to step 10.
If you entered the code correctly, the mode button flashes three times.
If the code works, the device should turn off.
9Turn the device back on and try some other buttons to make sure they work. If the code works for other buttons, stop here.
10If the code doesn’t work, repeat steps 3 through 9 with another device code from the tables.
11If you can’t find a code that works, try Setting Up Using Device Codes Scan that follows.
Sometimes POWER works when other buttons don’t. If in Limited Mode, try VOLUME or MUTE.
Try every code listed for your brand until one works for your device.
77
