
Chapter 11
Inactivity Standby
INACTIVITY STANDBY
1Press MENU.
2Select Preferences, and then Inactivity Standby.
3Highlight Activation and use the UP and DOWN ARROW buttons to switch between Enabled and Disabled.
4Highlight Inactivity Duration and use the UP and DOWN ARROW buttons to select the amount of time the receiver waits before turning off.
5Select Done.
Note: Select Defaults to reset the changes you’ve made to this feature.
TIPS
•To take full advantage of Dolby Digital 5.1 surround sound, you need an optical cable and a stereo that supports this feature.
•To use the Caller ID feature on this receiver be sure to have the receiver connected to an active phone line and have Caller ID service from your phone company.
QUESTIONS
•How can I see who has called me in the past? Open your Caller ID History by pressing MENU, select System Setup and then Caller ID History.
•Why is my audio in another language? You may have selected an alternate language. See the instructions on page 98 to change your preferred language.
•How can I change the channel order in the Program Guide? You can switch from ascending order (lowest to highest) or descending order (highest to lowest) by following the instructions on page 95.
102