Dish Network 722k important safety instructions Guide Conventions, How to Use this User Guide

Introduction

How to Use this User Guide

Guide Conventions

•The names of remote control buttons are all uppercase. Example: Press SAT.

•Select means to move the highlight to an on-screen option or choice in a list and press SELECT on the remote control.

Example: Select the Locks option.

•This guide uses HD for high definition and SD for standard definition.

•Where this guide mentions nearby TV, it is referring to TV1, the TV nearest the receiver. The nearby TV receives TV1 menus and programming from the receiver’s TV1 outputs and is connected using short audio/video cables.

•Where this guide mentions remote TV, it is referring to TV2, the cable-ready TV(s) located in a room away from the receiver. The remote TV receives TV2 menus and programming from the receiver’s TV2 outputs through your in-home cable system.

•Where this guide mentions remote control, it refers to either Remote Control 1 when viewing a nearby TV or Remote Control 2 when viewing the remote TV(s). If a specific remote control must be used, this guide will refer directly to Remote Control 1 or Remote Control 2.

•The instructions in this guide are shown in two ways:

–Instructions in the form of pictures are handy if you’d like to learn something quickly. These instructions are numbered left to right as shown in the sample below.

–Instructions that are written out are helpful if you’d like to learn more details.

3