Connections and Setup
Connecting a Broadband Internet Connection
Phone System Setup
You must set up the receiver for your telephone system (touch tone or rotary), and set a telephone number prefix, if you need a prefix to make an outside call.
Note: A prefix is different than an area code.
1Press MENU, then select System Setup, Installation, and then Phone System.
2Select the Touch Tone or the Rotary Phone option in the Phone Type list.
3Select either the No Prefix or the Prefix Code option in the Outside Line Prefix list.
Note: Usually, you need a telephone number prefix only for business installations. For most residential installations, all you need to do is set the telephone system type. The default setting of No Prefix will allow correct dialing. If this is the case, select the Save option to save the above setting, and stop here. If you do need to set a prefix, then instead of selecting the Save option, go on to step 5.
4If you selected No Prefix, select Done.
5If you selected Prefix Code, the receiver highlights the box where you must enter the exact sequence used when dialing an outside line.
6Select Done.
CONNECTING A BROADBAND INTERNET CONNECTION
If you have broadband
Refer to tech.dishnetwork.com and search for “home networking” for detailed instructions on making this type of connection.
113