Dish Network 722k important safety instructions Checking the Device Codes

Remote Controls

Controlling Other Components

Checking the Device Codes

Use these steps to find the device code you’ve set for each remote control mode (TV, DVD or VCR, and AUX).

Instructions Additional Information

1Press and hold the mode button until all the other mode buttons light up, and then release the button. The mode button flashes.

For example, hold TV until all of the other mode buttons light. When you let go, TV will flash.

2Press the POUND (#) button twice. Watch the mode light to determine your code. The mode button flashes the number for each digit of the device code, with a pause between the groups of flashes. A quick flash is for zero.

For example, if the code is 570, the mode button flashes five times, pauses, flashes seven times, pauses, and flashes once quickly.

For AUX mode: The first group of flashes tells you what the AUX mode controls. A quick flash (zero) before the three-digit code is for a TV, one regular flash is for a VCR, and two flashes is for a tuner, or amplifier.

For a satellite receiver programmed in AUX mode: The AUX mode button will flash the same number of times as the address number.

For Limited Mode: If you have programmed a TV or VCR in Limited Mode, the device mode button flashes once at the end of the flash sequence.

For example, if the TV code is 570, the AUX mode button flashes once quickly (indicating 0 for TV), pauses, flashes five times, pauses, flashes seven times, pauses, and flashes once quickly.

For example, if the receiver address is 3, the AUX mode button flashes three times.

For example, if the TV code is 570, the AUX mode button flashes once quickly (indicating 0 for TV), pauses, flashes five times, pauses, flashes seven times, pauses, flashes once quickly, and then flashes once (indicating it is in Limited Mode).

79