Epson High Speed Int. Print Server manual 106

About Password

A password is required to configure the print server. When you click OK in the setting dialog box or click Return to Default, the Password dialog box appears.

1.To set the password or to change the current password, click Change Password. The Change Password dialog box appears.

2.When you set a password for the first time, leave the Current Password box blank, and enter a password in the New Password box and in the New Password (again) box (up to 20 characters). Then click OK. Passwords are case sensitive.

Note:

❏The same password is used for EpsonNet WinAssist, MacAssist, and WebAssist.

❏Since the new password takes effect after the data is sent to the print server, enter the old password immediately after changing the password.

❏If you forget your password, you need to initialize the print server. See “Initializing the Print Server” on page 237 for instructions.

94EpsonNet MacAssist Configuration Utility