Note:

Be sure to initialize the print server when you install or reinstall the print server.

Press the status sheet button more than 20 seconds.

4.Turn off the printer.

5.Connect an Ethernet cable (Category 5 shielded twisted-pair cable) to the RJ-45 connector on the print server, and then connect its other end to the network.

c Caution:

❏You must use a Category 5 shielded twisted-pair cable to connect the print server to prevent malfunction.

❏Do not connect or disconnect the network cable when the printer is on.

❏Do not connect the print server and the computer directly. Be sure to use a HUB to connect the print server to the network.

Note:

You can use both 10Base-T and 100Base-TX. If you print a lot of data, we recommend that you use a high-speed network of 100Base-TX with a light network traffic.

6. Turn on the printer.

32How to Set Up the Print Server