Epson High Speed Int. Print Server How to Set Up the Print Server, Chapter, Connecting the Print Server to the Network

Chapter 2

How to Set Up the Print Server

This chapter explains how to set up the print server. This includes connecting the print server to the network, installing EpsonNet WinAssist/MacAssist, and using EpsonNet WinAssist/MacAssist to assign an IP address to the print server.

Connecting the Print Server to the Network

Follow the steps below to connect the print server to the network.

wWarning:

Before you install or uninstall the print server, be sure to turn off the printer to prevent electric shock.

1.Make sure the printer is turned off. If you are using an ink jet printer, unplug the power cord from the wall outlet.

2.Insert the print server in an optional interface slot and tighten the screws. For more details, see the manual shipped with your printer.

3.Initialize the print server. To do this, turn on the printer while holding down the status sheet button for twenty seconds to initialize the print server. While the orange Status light and the yellow Data light are on, initialization is in progress.

2

2

2

2

2

2

2

2

2

2

2

2

How to Set Up the Print Server 31