7.Check the lights on the print server. The orange Status light and the yellow Data light go on. After a while, the green or orange Status light turns on and the Data light flashes.
8.To print a status sheet, press the status sheet button on the print server. Press the status sheet button once to print a simple status sheet, or twice to print a full status sheet.
If the status sheet prints, this indicates the print server has been set correctly.
c Caution:
❏Do not press the status sheet button while the orange Status light and the yellow Data light are on; otherwise, the print server will return to its factory default settings, and the network status sheet will not print correctly as well.
❏After turning off the printer, wait until the status lights go off before turning it back on or before removing the print server; otherwise, the print server may not work correctly.
Note for Mac OS X 10.2.4:
Since the printer supports Rendezvous and is on by default, you can use the printer on a network just by connecting it to the network. If you want to disable the Rendezvous setting, use EpsonNet WebAssist. See “Configuring the Print Server Using EpsonNet WebAssist” on page 202 for details.
Now, you can configure the print server for the network using EpsonNet WinAssist/MacAssist. Go to “Installing EpsonNet WinAssist/MacAssist” on page 34.
2
2
2
2
2
2
2
2
2
2
2
2
How to Set Up the Print Server | 33 |