11.Select the Register the network interface’s address to DNS server check box if you want to register the host name and domain name to the DNS server through the DHCP server that supports Dynamic DNS.
If you want to register the host name and the domain name directly to the DNS server, select the Register directly to DNS server check box.
12.Select the Use Universal Plug and Play check box if you want to use the Universal Plug and Play function in Windows Me or future operating systems.
Change the default Universal Plug and Play device name, if desired. This device name is used for Windows that supports the Universal Plug and Play function.
13.After changing the settings, click OK.
14.In the TCP/IP dialog box, click OK. The Password dialog box appears.
15.Enter your password (up to 20 characters) and then click OK to save the settings. If you are entering a password for the first time, click Change Password and set the password. For more information on passwords, see “About Password” on page 94.
Follow the
c Caution:
Since it takes 2 or 3 minutes to send new settings to the print server, wait until an
2
2
2
2
2
2
2
2
2
2
2
2
How to Set Up the Print Server | 47 |