Note:

If you have selected Remote (rprinter on IPX), configure the print server using EpsonNet WinAssist, as described in the next section, and then print a status sheet.

Go to the next section if you select Remote (rpinter on IPX).

Go to “Setting the printer on client workstations” on page 158 if you select Remote (LPR on IP) or Forward jobs to Queue.

Configuring for NetWare using EpsonNet WinAssist

Follow the steps below if you want to use the printer in IPX network.

Note:

Be sure that the one of the following clients is installed on your computer: Novell Client 32, Novell IntranetWare Client, or Novell Client.

1.Turn on your printer.

2.From any NetWare client, log in to the target NetWare server as an ADMIN.

3.Run EpsonNet WinAssist from the Start menu. See “NetWare” on page 63 for details.

If the IP address of the printer is already assigned, you can use EpsonNet WebAssist too. See “NetWare” on page 211 for details.

6

6

6

6

6

6

6

6

6

6

6

6

Settings for NetWare Server

157