5.For LPR, Internet, or Microsoft Network Shared printing: Double-click Internet Protocol (TCP/IP) in the Local Area Connection Properties dialog box to open the Internet Protocols (TCP/IP) Properties dialog box. Set the IP address, the subnet mask, etc. and then click OK.

6.Restart the computer.

The necessary components are now installed. Go to the next chapter “How to Set Up the Print Server” on page 31.

Windows 2000

For Windows 2000, use the following procedure to install the necessary components.

Note:

❏The Windows 2000 CD-ROM may be required during the installation.

❏When using TCP/IP or IPP for printing, you need to set the IP address, the subnet mask, and the default gateway of the computer.

1.Click Start, point to Settings, and then select Network and Dial-up Connections. The Network and Dial-up Connections screen appears.

2.Right-click the desired network connection and then select

Properties.

1

1

1

1

1

1

1

1

1

1

1

1

Installing Components on Your Computer

23