TCP/IP
IP Address Settings
Items | Explanations |
|
|
Method for Acquiring the | Select a method for acquiring IP addresses. If |
IP Address | Auto is selected, DHCP becomes available. |
| To use the DHCP server, make sure it is installed |
| on your computer and correctly configured. |
| See your operating system’s online help for |
| detailed instructions. |
| To set the IP address manually, select Manual. |
|
|
IP Address | Enter an IP address for the print server. Be sure |
| the IP address does not conflict with any other |
| devices on the network. |
|
|
Subnet Mask | Set the subnet mask. |
|
|
Default Gateway | Set the gateway address if needed. |
|
|
Set Using Automatic | Select Enable to get a private address |
Private IP Addressing | between 169.254.1.1 and 169.254.254.254 |
(APIPA) | automatically when an IP address cannot be |
| obtained by the DHCP server; otherwise, |
| select Disable. |
|
|
Set Using PING | Enables or disables IP address setting using the |
| ping command. |
|
|
DNS Server Address Settings | |
|
|
Items | Explanations |
|
|
Acquire DNS Server | Select either Enable or Disable to acquire the |
Address Automatically | DNS server address from the DHCP server. |
|
|
DNS Server Address | Enter the DNS server address. When the DHCP |
| server does not respond even Enable is |
| selected for Acquire DNS server address |
| automatically, the DNS server address set |
| here is used. |
|
|
10
10
10
10
10
10
10
10
10
10
10
10
EpsonNet WebAssist | 213 |