Setting up the Analyzer20
FUNCTION PREFerences
FUNCTION PREFerences
To access the FUNCTION PREFerences menus:
1. SETUP
F3
2.
3. ENTER
1
2
3
4
5
6
7
8
9
10
11
12
| F1 |
|
|
|
|
| F4 |
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
13 | 14 | 15 | 16 | ||||
FUNCTION PREFerences allows you to customize data presentation of measuring functions. This concerns for instance Offset and Span of Trend and Waveform displays. The entry menu is available in the selected information language. The table below gives a survey adjustable items for each function. A measuring function stays active while you adjust its settings. This allows you to directly judge the result of the adjustment.
Some items have separate adjustments for Phase and Neutral. Function key F3 is used to switch between Phase and Neutral adjustments. For Scope and Transients a set of default settings is available giving good data presentation under most circumstances. Press F4 – DEFAULT to restore this set.
For other measuring functions F4 switches between AUTO ON and OFF. In AUTO ON, range and offset of Trends are updated automatically on every new acquisition to make them fit closely within the available window. Manual adjustment is possible if F4 is set to
