Fluke 435 user manual Confirm the selection and return to previous menu

Fluke 434/435

Users Manual

Figure 20-1. Welcome screen at power-on

The Settings are grouped in four functional sections and are explained accordingly in four sections of this manual chapter:

•General Settings: Date, Time, GPS time synchronization, wiring Configuration, nominal Voltage, nominal Frequency, current and voltage probe type, information language, survey and installation of options.

•FUNCTION PREFerences: adjustment of Offset and Span of Trend and Waveform displays, contents of harmonics Meter screen and harmonics settings, power settings, flicker D-parameter settings, Inrush defaults, and Transient settings. Function key F4 in these menus gives a reset to factory default settings. Default settings usually give a good display.

•USER PREFerences: adjustment of Phase Identification and Colors, Printer and RS- 232 settings, Auto shut-off, definition of User name (as shown in entry screen), and display contrast. Many menus have a function key for reset to factory default settings.

•Limits Settings: for save, recall, and definition of the limits for power quality monitoring.

The figure below shows the entry menu present under the SETUP key.

Entering the Setup menu:

c SETUP

Menu navigation and selections:

Selection of the item to be adjusted.

ENTER

Press to access the selected settings menu.

To select (up/down) and adjust (left/right) items in a settings menu.

	Confirm the selection and return to previous menu.
F5

20-2