![](/images/new-backgrounds/1105218/105218195x1.webp)
Fluke 434/435
Users Manual
6
7
8
9
10
11
12
13
Freq: adjustment of Nominal Frequency. Use the up/down arrow keys to select 60 or 50 Hz. Press Function key F5 – OK to confirm.
Limits: see section Limits Settings.
Clamp, A range, V scale: adjustment of the Analyzer to the characteristics of current clamps and voltage leads. The default selection is valid for the accessories as supplied with the Analyzer. The supplied voltage leads are 1:1 types; when using attenuating leads or a voltage transformer you must adapt the voltage scale accordingly (e.g. 10:1 for 10 times attenuation). Identically the current scale can be adjusted when using current converters in combination with current clamps. With the arrow keys you can customize voltage and current readout to any desired transformation ratio. There are separate selection tables for the Phases and Neutral: Function key F3 is used for selection.
F1 – LANGUAGE: use the up/down arrow keys to select the desired information language. Press Function key F5 – OK to confirm.
F2 – VERSION & CAL: access to a
F3 – FUNCTION PREF.: see section FUNCTION PREFerence.
F4 – USER PREF.: see section USER PREFerence.
F5 – BACK: return to last active measuring mode.