
Tips and Maintenance22
Troubleshooting
Optional Accessories.
Item | Ordering Code |
|
|
Logger Functions for Fluke 434 (Mains Signaling, Logging). | |
|
|
Optical Isolated | PM9080 |
|
|
GPS Synchronization Unit | GPS430 |
|
|
Print Adapter for Parallel Printers | PAC91 |
|
|
Optical Isolated Trigger Probe (to test energy meters) | ITP120 |
|
|
AC Current Clamp 200 A (10 mV/A) and 20 A (100 mV/A) switcheable. | i200s |
|
|
AC Current Clamp 2000 A (1 mV/A) and 200 A (10 mV/A) switcheable, flexible. | i2000flex |
|
|
AC Current Clamp 1000 A (1 mV/A), 100 A (10 mV/A), and 10 A (100 mV/A) | i1000s |
switcheable. |
|
|
|
AC Current Clamp 3000 A (0.1 mV/A), 300 A (1 mV/A), and 30 A (10 mV/A) | i3000s |
switcheable. |
|
|
|
AC/DC Current Clamp 100 A (10 mV/A) and 10 A (100 mV/A) switcheable. | |
|
|
AC Current Clamp 5 A (400 mV/A, 3 pack) | i5s PQ3 (*) |
|
|
Service Manual (English) | www.fluke.com |
(*): The SETUP/Clamp menu offers you a dedicated position to adapt the Analyzer for use with i5s.
Troubleshooting
Analyzer does not start up.
The battery may be completely empty. In this case the Analyzer will not start up, even if it is powered by the Battery Charger/Power Adapter. Charge the battery first: power the Analyzer with the Battery Charger without turning it on. Wait about 15 minutes and try turning on the Analyzer again.
Analyzer shuts down after a few seconds.
The battery may be empty. Check the battery symbol in the screen header. The symbol indicates that the battery is empty and must be charged.
Attention: the Analyzer switches off automatically when powered by battery only if no further knobs are operated after