Fluke 434/435
Users Manual
Available function keys:
|
|
|
| Switch between voltage readout per phase |
| F1 |
| ||
|
|
|
| (A/L1,B/L2,C/L3,N) or |
|
|
|
| phase Y configuration. |
|
|
|
|
|
F4
F5
Access to the Trend screen. For description see below.
Switch between HOLD and RUN of screen update. Switching from HOLD to RUN invokes a menu to select immediate (NOW) or TIMED start time which allows you to define start and duration of the measurement.
Trend
To access the VOLTS/AMPS/HERTZ Trend screen:
e | F4 |
All values in the Meter screen are recorded, but the Trends from each row in the Meter screen are displayed one at a time. Press Function key F1 to assign the up/down arrow keys to row selection.
The traces build up from the right side. Readings in the header correspond to the most recent values plotted on the right.
Available function keys:
|
|
|
| Assign up/down arrow keys to select a row from the Meter |
| F1 |
| ||
|
|
|
| screen for Trend display. |
|
|
|
|
|
F2
F3
F4
F5
Cursor on/off.
Assign the arrow keys to Cursor or Zoom operation.
Return to Meter screen screen.
Switch between HOLD and RUN of screen update. Switching from HOLD to RUN invokes a menu to select immediate (NOW) or TIMED start time which allows you to define start and duration of the measurement.
Cursor. When the Cursor is on, the Trend values at the Cursor are displayed in the screen header. Moving the Cursor off the left or right side of the screen brings the next of six screens into the viewing area.
