Basic Operations and Menu Navigation | 4 |
Display Brightness |
Caution
To prevent decrease of battery capacity, charge it at least twice a year.
Power On/Off:
Press to power up or down with the last setup configuration. The welcome screen shows what Analyzer settings are currently in use. At power on a single beep can be heard.
To save battery power, the Analyzer display dims automatically when no keys are operated during a certain time. This time is adjustable.
When a key is operated, the display turns on again.
For the adjustment of
Attention: the Analyzer switches off automatically when powered by battery only if no further knobs are operated after
Display Brightness
Press repeatedly to dim/brighten the backlight.
Keep pressed for more than 5 seconds for extra brightness for better visibility in strong sunlight.
Low brightness saves battery power.
Locking the keyboard
The keyboard can be locked to prevent unwanted operation during unattended measurements:
ENTER | Press for 5 seconds to lock or unlock the keyboard. |
Menu Navigation
Most of the Analyzer functions are menu operated. Arrow keys are used to navigate through menus. The Function keys F1 ... F5 and the ENTER key are used to make selections. Active Function key selections are highlighted with a black background.
How to use the menus is illustrated in the example below on how to adjust the Analyzer for use with a certain printer type.
SETUP
F4
The SETUP menu pops up.
Submenu SETUP USER PREF appears.
Highlight Printer: 
.
ENTER
The PRINTER submenu appears. In this menu you can adjust printer type and baudrate.
