Mains Signaling16
Events Table
Available function keys:
|
|
|
| Assign up/down arrow keys to select a set of trends and the |
| F1 |
| ||
|
|
|
| belonging readout. |
|
|
|
|
|
|
|
|
| Cursor on/off. |
| F2 |
| ||
|
|
|
|
|
F3
F4
F5
Assign the arrow keys to Cursor or Zoom operation.
Access to Events tables.
Switch between HOLD and RUN of screen update. Switching from HOLD to RUN invokes a menu to select Immediate or Timed Start and Duration of the measurement.
Cursor. When the Cursor is on, the Trend values at the Cursor are displayed in the screen header. Moving the Cursor off the left or right side of the screen brings the next of six screens into the viewing area.
Zoom. Allows you to expand or shrink the display vertically or horizontally to view details or to fit a complete graph within the screen area. Zoom and Cursor are operated by the arrow keys and explained in Chapter 19.
Offset and Span of the Trends are auto ranging for a good display in most cases, but they are adjustable. The adjustment menu is reached via the SETUP key and function key F3 – FUNCTION PREF. See Chapter 20, FUNCTION PREFerences.
Events Table
To access the Mains Signaling events table:
f | F4 |
The events table shows in Normal mode the events (V3s above the limit) that occurred during the measurement. Date, time, type (phase, signal 1 or signal 2), level and duration of each event are listed. In Detail mode additional information is given on threshold crossings.
Available function keys:
|
|
|
| Switch between Normal and Detailed events table. |
| F3 |
| ||
|
|
|
|
|
F4
F5
Return to next higher menu.
Access to Trend screen. Two ways to access Trend are explained below.
