Fluke 434/435
Users Manual
ENTER
F5
Highlight baudrate: 
.
Adjust the required transmission speed.
Highlight the Printer type you want to use: 
.
Press to confirm the selection.
Press to return to the next higher menu SETUP USER PREF. This menu is the starting point for many adjustments such as Display Contrast Adjustment and Reset to Factory Defaults.
Display Contrast
Use submenu SETUP USER PREF as a starting point. How to get there is explained above under Menu Navigation:
Adjust the Display Contrast to your personal taste.
Reset to Factory Defaults
Proceed as follows to reset the Analyzer to factory default settings. Bear in mind that recorded data and adjustments will be lost.
Use submenu SETUP USER PREF as a starting point. How to get there is explained above under Menu Navigation:
|
|
|
| Press to start the reset to default settings. Because of the risk |
| F1 |
| ||
|
|
|
| of unwanted erasure of data, a confirm menu pops up. |
|
|
|
|
|
|
|
|
| Press to confirm the reset. |
| F5 |
| ||
|
|
|
|
|
Proceed as follows to reset the Analyzer to factory default settings without loss of data: turn power off, then press and hold SAVE SCREEN and turn on again. You should hear a double beep.
