GE EPM 9650/9800 manual Enable / Disable 1 Register, Email Mode Bitmap

7.44: Auto TFTP Download Settings Block (Network Settings 10/100 Card) (50785-50860)

•Enable / Disable - 1 Register.

Network Settings 10/100 Card

Auto TFTP Download Settings

Enable / Disable

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0

Bit 15:

1 = Enable Auto TFTP Download

0 = Disable Auto TFTP Download

•TFTP Port - 1 register, 2 bytes. Two byte unsigned integer.

•Client IP - 2 registers, 4 bytes. Each byte is unsigned integer.

•Server IP - 2 registers, 4 bytes. Each byte is unsigned integer.

•Default Gateway - 2 registers, 4 bytes. Each byte is unsigned integer.

•Subnet Mask - 2 registers, 4 bytes. Each byte is unsigned integer.

•Email Mode - Bitmap.

Bit 15: Require Authentication.

A bit value of 1 means No authentication is required. A bit value of 0 means authentication is required.

Bit 14 to 0: Not used. Reserved.

•FTP Download - Reserved for future use.

•Download Filename (128 Bytes) - 64 registers, 128 bytes. Each byte is ASCII.

7.45: Email Client Settings (Network Settings 10/100 Card) (50861-51020)

Email Server IP Address/ Name (64 bytes) - 32 registers. 64 bytes. Each byte is ASCII.

GE Communicator Ext Email Processing Service IP Address/ Name (64 bytes) - 32 registers, 64 bytes. Each byte is ASCII.

•Return/ Reply Address (64 bytes) - 32 registers, 64 bytes. Each byte is ASCII.

•Email Subject Text (64 bytes) - 32 registers, 64 bytes. Each byte is ASCII.

•Email Username (32 bytes) - 16 registers, 32 bytes. Each byte is ASCII.

•Email Password (32 bytes) - 16 registers, 32 bytes. Each byte is ASCII.

7-29