GE EPM 9650/9800 manual Modem Feature Dial-Out Mask Event Mask, Bit Event Description

•Primary Retry Delay - 1 register, 2 bytes. The number of minutes (0-1000) between retries.

•Primary Phone Number (48 bytes) - 24 registers, 48 bytes. The first phone number (up to 48 characters) called for automated callout.

•Time Limit - Reserved for future use.

•Event Mask - 1 register, 2 bytes. These are the conditions that EPM meter dials out when the condition occurs.

Modem Feature Dial-Out Mask (Event Mask)

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0

A bit value of 1 means the feature is disabled for reporting.

A bit value of 0 means the feature is enabled for reporting.

Bit	Event Description
0	Limits Status Change
1	High Speed Input Change
2	Waveform Record Captured
3	CBEMA Power Quality Event
4	Control Output Change
5	Filling of Meter Memory
6	Cycling of Control Power
7	Modem Password Failure
8	Failure of Communication with the Device
9-15	Reserved

•Secondary Retry Limit - 1 register, 2 bytes. The user-set limit for retry attempts (0-1000).

•Secondary Retry Delay - 1 register, 2 bytes. The number of minutes (0-1000) between retries.

•Secondary Phone Number (48 bytes) - 24 registers, 48 bytes. The second phone number (up to 48 characters) called for automated callout.

•Device Addresses at Gateway (Device 1, Device 2) - The address has one byte unsigned integer. The device address can be any number except 1. The number 1 is always reserved for the Primary Device.

•Device Addresses at Gateway (Device 3, Device 4) - The address has one byte unsigned integer. The device address can be any number except 1. The number 1 is always reserved for the Primary Device.

7-27