GE EPM 9650/9800 manual Numeric Pager ID 7 bytes Reserved for future use

•Call Fail Reset Limit - 1 byte. User-set value for the number of hours the modem will lock out incoming calls if the Incoming Connection Failure Limit is reached (1-50 hours).

•Violation Lockout Time - 1 byte. Use-set time limit for the number of hours (1-32) modem will be inaccessible. The Violation Lockout provides a level of security against bad passwords.

•Violation Limit - 1 byte. User-set value for number of times the modem will allow unsuccessful connection attempts (unable to supply correct password in three attempts) before locking up to incoming calls (1-10). Modem will disconnect from the incoming call and will not accept incoming calls for a period of time equal to the Violation Lockout Time.

•Log Full Limit Threshold (Covers All Logs) - 1 register, 2 bytes. Percent that a log is full before a call is triggered.

•Modem ID (32 bytes) - 16 registers, 32 bytes. Up to 32 Western Alphabet Characters (16 Asian Characters) can be written.

•Modem Password (10 bytes) - 5 registers, 10 bytes. Up to 10 alphanumeric characters (user-set) in addition to passwords that affect access to certain levels of the EPM meter. If the password is not entered correctly, the modem asks the user to enter the password again up to three times and disconnects after the third incorrect attempt.

•Numeric Pager ID (7 bytes) - Reserved for future use.

•Bitmap Set - 1 byte, 8 bits.

	Internal Modem Card Bitmap Settings
Bit 7	Call Back Type	0: Standard Mode
		1: Playback Mode
Bit 6	Modem Password	0: Password Not Active
	Flag	1: Password Active
Bit 5	Primary Line Type	0: Computer
		1: Pager
Bit 4	Primary Pager	0: Numeric
	Type	1: Alpha-numeric
Bit 3	Shared Phone Line	0: False
		1: True
Bit 2 - Bit 0	Not Used

•Rings to Answer - 1 byte. User-set value for the number of Rings (1-9) before the modem will go off-hook and attempt to answer an incoming call.

•Primary Retry Limit - 1 register, 2 bytes. The user-set limit for retry attempts (0-1000).

7-26