GE EPM 9650/9800 manual Mode 2 Network Mode 2 byte, Server / Service Enable

Mode 2 - Network Mode 2. 1 byte.

Bit 7: IP Address Resolution

A bit value of 1 means use DHCP server.

A bit value of 0 means use static IP address programmed into the meter. Bits 0-6: Reserved

•DNS Server 1 IP Address - 2 registers, 4 bytes. Each byte has unsigned integer values.

•DNS Server 2 IP Address - 2 registers, 4 bytes. Each byte has unsigned integer values.

•Server / Service Enable Bits - 32 Bits.

						Server / Service Enable
31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
						Server / Service Enable
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0

Bit 31: Undefined

Bit 30: Modbus TCP Client

Bit 29: GE EGD Data Port Server

Bit 28: Web Server

Bit 27: SMPT Client (Email)

Bit 26: FTP Server

Bit 25: FTP Client

Bit 24: HTTP / Modbus RTU Server

Bit 0 to 23: Reserved

A bit value of 1 means Enable the feature.

A bit value of 0 means Disable the feature.

•	Email Port Number:	1 register, 2 bytes. This is a 2-byte unsigned integer.
	Range:	65535 to 0.
•	FTP Port Number:	1 register, 2 bytes. This is a 2-byte unsigned integer.
	Range:	65535 to 0.

7-10