GE EPM 9650/9800 manual Type F56 Flicker Countdowns, Type F57 Accumulation in the Interval

3.56: Type F56 Flicker Countdowns

Length: 1 Register (2 bytes)

Range: 65,535 / 0 seconds

Unit: 1 second

This register contains an unsigned integer which is count-down in seconds until the end of a Flicker interval, Short Term or Long Term.

Example:

Register 06489, Short Term Flicker Countdown, might contain the following data:

Addr	06489
Value	0400H
Decimal	1024
Interpretation	1024 seconds remain until the next Short Term Flicker is computed.

3.57: Type F57 Accumulation in the Interval

Length: 1 Register (2 bytes)

Range: 465,535 / 0

Unit: VAh, VARh, Wh secondary or pulses

These registers contain a 2-byte unsigned integer.

Example:

Register 06397, Total VA hour (Quadrants 1+2+3+4) in the Interval, Secondary, might contain the following data:

Addr	06397
Value	0647H
Decimal	1607
VAh Secondary	1607 VAh Secondary

3.58: Type F58 12-bit RTU Sanity Register

Length: 1 Register

This register indicates the status of the meter. A normally functioning meter reports a value of 0x00000 or 0. Any non-zero value indicates that the unit is operating improperly.

3-37