GE EPM 9650/9800 manual Custom DNP Definition Block for Binary Input Object 1, Bit Resets

7.35: Custom DNP Definition Block for Binary Input (Object 1) (47425-47456)

•Line number: 2-byte unsigned integer

Line number and Point number indicate the Binary Input value used for 8 points in Object 1.

•Point number: 1-byte unsigned integer

•Class Assignments: 8-bit bitmap (1 byte). Bit 7, 6 and 5 will assign the Binary Input Change value to a Class. Bit 4 to bit 0 are not used.

Class Assignments for Binary Input Change

Bit 7	Bit 6	Bit 5	Class Assigned
0	0	0	No Class
0	0	1	Class 1
0	1	0	Class 2
0	1	1	Class 3
1	X	X	No Class
1	X	X	No Class
1	X	X	No Class
1	X	X	No Class

•Reserved: 4 bytes. Reserved for future use.

7.36: Custom DNP Definition Block for Binary Output (Object 10) (47457-47458)

• Enable / Disable Relays (1-16) (2 bytes): 0: Relay disabled 1: Relay enabled

Bits	15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
Relays	1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16
• Enable / Disable Resets (17-24) (1 byte):									0: Reset disabled					1: Reset enabled
	Bit							Resets

15 Log Reset

14Maximum Reset

13Minimum Reset

12Energy Reset

11Reset Time of Use Current Season and Current Month

10Manual Waveform Capture

9 Reset KYZ Output Accumulations

8 Reset Unit to Boot Mode - Default Communications Settings

7-0 Reserved

7-23