GE EPM 9650/9800 manual Average Settings Block, Exception Profile Block

•Transformer Loss Compensation (TLC) Enable - 1 byte, unsigned integer.

Transformer Loss Compensation (TLC) Enable

Value	Bit 0 & 1	Bit 2
0	Disabled	Add
1	Iron Only	Subtract
2	Copper Only
3	Both

•Internal KYZ Form - 1 byte bit map.

Refer to the Internal KYZ Settings Block (46330) for more detail.

A bit value of 0 = Form C = Pulse of the relay.

A bit value of 1 = Form A = Transition of the relay.

	Internal KYZ Form Relay Assignments
Bit Number	7	6	5	4	3	2	1	0
Relay Assignments	1	2	3	4	LED

•Daylight Savings Time Start/End.

Address - 4 registers, 8 bytes. Each byte has unsigned integer values (example below).

	Daylight Savings Time Start/End Byte Assignments
Register	45929		45930		45931		45932
Byte	High	Low	High	Low	High	Low	High	Low
Assignments	Reserved	Reserved	Month	Day	Hour	Minute	Second	Reserved

•% Loss of Watt or VAR

Address - 2 registers, 4 bytes, 2 bytes for integers and 2 bytes for fractions.

7.13: Average Settings Block (45949-45952).

•Thermal and Block Averaging Time Interval: 1 register, 2 bytes unsigned integer. The unit is in 1 second.

•Rolling Average Sub-Interval: 1 register, 2 bytes unsigned integer.

•Predictive Rolling Window Average: 1 register, 2 bytes unsigned integer.

•Number of Sliding Windows - 1 byte, unsigned integer.

•Time of Use Log Enable - currently not used.

7.14: Exception Profile Block (45953-45968).

•This block is not yet defined.

7-8