GE EPM 9650/9800 manual Type F36 Desired Relay States, Type F37 Relays Pending Update

Address		06000
Value		0400H
Bytes	04H	00H
Interpretation	Relay 1 has 4 seconds of delay remaining, Relay 2 has no delay remaining.

3.36: Type F36 Desired Relay States

Length: 1 Register (1 bytes)

This register has two bytes. Each byte has eight bits. The bits in these bytes are associated with the 16 Relays, the most significant bit of the most significant byte with Relay 1, through the least significant bit of the least significant byte with Relay 16.

A bit value of 1 means the relay should be energized (connected to Normal Open); a bit value of 0 means the relay should be de-energized (connected to Normal Close). These are states pending transmission to the relays.

Example:

Register 06008, Desired Relay States, Relays 1-16, might contain the following data:

Address								06008
Value								0461H
Bytes					04H							61H
Bits	0	0	0	0	0	1	0	0	0	1	1	0	0	0	0	1
Limit	1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16
State (NO/NC)	NC NC		NC NC NC NO NC					NC NC NO NO NC NC NC NC								NO
Interpretation			Relays 6, 10, 11 and 16 should be energized; all others de-energized.

3.37: Type F37 Relays Pending Update

Length: 1 Register (2 bytes)

This register has two bytes. Each byte has eight bits. The bits in these bytes are associated with the 16 Relays, the most significant byte with Relay 1 through to the least significant bit of the least significant byte with Relay 16.

3-26