Note
CAUTION
To replace the printheads
Only replace printheads after you have attempted to clean the printheads. See To clean printheads automatically and To clean the printhead contacts manually.
1Ensure the printer is plugged in and turned on.
2Open the top cover.
3Lift to open the printhead latch.
4Lift the handle of a printhead and use it to pull the printhead out of its slot.
5Remove the new printhead from its package, and then remove the protective tape.
6Insert the printhead into its
7Close the printhead latch. Ensure it is in the lock position.
8Close the top cover.
9Wait while the printer initializes the printheads and prints an alignment page.
To clean the printhead contacts manually
To find out which printheads are compatible with your printer, see Supplies.
Clean the printhead contacts only after you have attempted to clean the printheads automatically. See To clean printheads automatically. Printhead contacts contain sensitive electronic components that can be damaged easily.
1Ensure the printer is plugged in and turned on.
2Open the top cover.
3Wait two or three seconds, and then unplug the printer power cord.
4Lift to open the printhead latch.
5Lift the handle of a printhead and use it to pull the printhead out of its slot.
ENWW | 23 |
