Configure network options
This section contains information about configuring the printer’s network settings.
For information about opening and using specific management tools, see Overview of printer management tools.
For a list of current settings, print a configuration page. See Understanding the configuration page.
Use this tool... | ...to do the following. |
|
|
Embedded Web server | z To configure network parameters: Click the Networking tab. |
| z To set a static IP address: Click the Networking tab, select |
| Manual from the IP Configuration Method |
| enter the static IP address in the IP Address box, enter the |
| Host Name, Subnet Mask, and Default Gateway, if needed, |
| and click Apply. |
| Note: It is not recommended that you assign a static IP address |
| to the printer. However, a static IP address might resolve certain |
| setup and printing problems, such as a conflict with a personal |
| firewall. |
HP Web Jetadmin software To learn about using the HP Web Jetadmin software to configure the printer’s network settings, open the HP Web Jetadmin software and see the software documentation for information. See HP Web Jetadmin software.
ENWW | 53 |