HP 1200 manual Power button and press

Light pattern	Light description	Explanation and
		recommended action
	The Power light and the	The printhead latch is not secured.
	Printhead light are on.	z Open the top cover and press down
		firmly on the printhead latch to ensure
		that it is secured properly.
		z Make sure the protective tape on
		each printhead has been removed.
	The Power light is on and one	An ink cartridge is low on ink and will need
	or more color indicator lights	to be replaced soon.
	is on.	z No action is required.

The Power light is on and one or more color indicator lights blinks.

An ink cartridge is out of ink and must be replaced before you can continue printing.

zReplace the ink cartridge indicated.

The Power light, the Ink	One or more of the ink cartridges
Cartridge light, and one or	is missing.
more of the color indicator	z Install the ink cartridges and try to
lights are on.	print.
	z If the error persists, replace the ink
	cartridge or cartridges indicated.
The Power light is on and the	One or more of the ink cartridges is faulty
Ink Cartridge light and one or	or has expired.
more of the color indicator	z Replace the ink cartridge indicated.
lights blink.

The Power light and one or more of the color indicator lights are on, and the Ink Cartridge light blinks.

A non-HP ink cartridge is installed.

CAUTION: Damage to the printer that results from modifying or refilling the ink cartridges, or from using non-HP ink cartridges, is not covered under the warranty.

zIf you thought that this ink cartridge was an HP ink cartridge, return it to the place where you purchased it.

Buy and install an HP ink cartridge.

zIf you choose to use a non-HP ink cartridge, press and hold down the

(Power button) and press the

(Resume button) three times.

All lights except the Power light go off. Damage that results to the printer from using this cartridge is not covered under the warranty.

ENWW 45