Configuring TCP/IP parameters
You can use the printer control panel to configure the following
TCP/IP parameters:
|
| usage of the BOOTP file for configuration parameters (the default |
|
| is to use the BOOTP file) |
|
| IP address (4 bytes) |
|
| subnet mask (4 bytes) |
|
| default gateway (4 bytes) |
| TCP/IP connection timeout (in seconds) | |
|
| |
Note | Do not disable BOOTP if you will be using RARP or DHCP to configure | |
| TCP/IP parameters. | |
| To configure TCP/IP parameters from the printer | |
| ||
| control panel | |
| 1 | Press MENU until HP EIO 1 or 2 MENU displays. |
| 2 | Press ITEM until CFG NETWORK=NO * displays. |
| 3 | Press VALUE until CFG NETWORK=YES displays. |
| 4 | Press SELECT once. CFG NETWORK=YES * displays. |
| 5 | Press ITEM until CFG TCP/IP=NO * displays. |
| 6 | Press VALUE once. CFG TCP/IP=YES displays. |
| 7 | Press SELECT once. CFG TCP/IP=YES * displays. |
| 8 | Press ITEM to configure TCP/IP parameters manually. |
|
| BOOTP=YES * displays. |
EN
Chapter 6 135