Printer control panel problems
Control panel settings work incorrectly
Problem | Solution |
|
|
The printer control panel display is blank or is | Fans may run while the printer is in standby |
not lit, even when the fan is running. | mode (off). Press the printer’s power switch to |
| turn the printer on. |
|
|
Printer settings in your software application or | Settings in your software application or printer |
printer driver are different from the printer | driver override printer control panel settings. |
control panel settings. | Verify that the settings in your software |
| application or printer driver are correct. |
|
|
Control panel settings were not correctly saved | Reselect the control panel settings and then |
after they were changed. | press SELECT. An asterisk (*) should appear to |
| the right of the setting. |
|
|
The Data indicator is lit and there are no pages | Buffered data exists in the printer. Pressing GO |
printing. | prints the buffered data using current control |
| panel settings and then activates the new |
| control panel settings. |
|
|
If you are on a network, another user may | Consult your network administrator to |
have changed printer control panel settings. | coordinate changes to printer control panel |
| settings. |
|
|
Unable to select Tray 3 (optional 500-sheet paper feeder)
Problem | Solution |
|
|
Tray 3 | Tray 3 only displays as an option if it is |
appear as an input tray option. | installed. Verify that Tray 3 is correctly |
| installed. Verify that the printer driver has been |
| configured to recognize Tray 3. |
|
|
EN
Chapter 9 193
