Printer control panel messages (continued)
Message | Description | Recommended action |
|
|
|
TRAY X SIZE= | Media has been loaded into the | The most recently configured |
[SIZE] | specified tray. | media size will be displayed |
|
| with an asterisk next to it. |
|
| Press |
|
| possible media sizes. |
|
| Press SELECT to display the |
|
| current media size. |
|
| Press GO to remove the |
|
| message. |
|
|
|
TRAY X TYPE= | Media has been loaded into the | The most recently configured |
[TYPE] | specified tray | media type will be displayed |
|
| with an asterisk next to it. |
|
| Press |
|
| possible media types. |
|
| Press SELECT to display the |
|
| current media type. |
|
| Press GO to remove the |
|
| message. |
|
|
|
UNABLE TO | Memory or file system failures | Only one copy will be |
MOPY JOB | would not allow a mopy job to occur. | produced. |
|
|
|
UNABLE TO | Memory or file system failures | Install additional memory in the |
STORE JOB | would not allow a stored job to | printer. |
| occur. | Install a hard disk in to the |
|
| printer |
|
| If a hard disk is installed, delete |
|
| previously stored print jobs. |
|
|
|
UNSUPPORTED SIZE | There is unsupported print media in | Remove the unsupported |
IN TRAY XX | the specified tray. | media size from the specified |
|
| tray. |
|
|
|
WAIT FOR PRINTER | The printer is reinitializing. The | No action required. |
TO REINITIALIZE | printer returns to the READY state |
|
| upon completion of this process. |
|
|
|
|
WARMING UP | The printer fuser is heating up. | No action required. |
| Printing will continue when the fuser |
|
| reaches the proper temperature. |
|
|
|
|
WASTE TONER FULL | The waste toner receptacle in the | Replace the drum kit. |
REPLACE DRUM KIT | drum kit is full. |
|
|
|
|
162 Printer control panel messages | EN |
