To configure Apple AppleTalk parameters from the printer control panel

1Press MENU until HP EIO 1 MENU displays.

2Press ITEM until CFG NETWORK=NO * displays.

3Press VALUE until CFG NETWORK=YES displays.

4Press SELECT once. CFG NETWORK=YES * displays.

5Press ITEM until CFG ETALK=NO * displays.

6Press VALUE until CFG ETALK=YES displays.

7Press SELECT once. CFG ETALK=YES * displays.

8Press ITEM. PHASE=1 or PHASE=2 displays.

9Press ITEM to retain the value and continue, or press VALUE to change the phase parameter.

10Press SELECT to save the new value.

11If you are finished, press GO to return the printer to the READY

state.

– OR –

See the appropriate sections for other protocols that will be used.

EN

Chapter 6 137

Page 138
Image 138
HP 4550 manual