Printer control panel messages (continued)
Message | Description | Recommended action | |
|
|
| |
53.XY.ZZ ERROR | Indicates a memory error. If a DIMM | Clear the error by turning the | |
BASE MEM BANK B | caused the error, the DIMM will not | printer off and then on. Verify | |
or | be recognized. Values of X, Y, and | that the DIMM is correctly | |
53.XY.ZZ ERROR | Z are as follows: | installed. If the DIMM is | |
DIMM A BANK B |
|
| correctly installed, replace the |
|
| DIMM. See “Installing DIMMs” | |
alternates with | X | Memory Type | |
PRESS GO TO | 0 | ROM | on page 217. If the problem |
CONTINUE | 1 | RAM | persists, call HP Support. |
|
|
| |
alternates with | Y | Device Location |
|
NO MORE ERRORS |
| ||
0 | On board |
| |
CONTINUING |
| ||
1 | DIMM Slot 1 |
| |
|
| ||
| 2 | DIMM Slot 2 |
|
| 3 | DIMM Slot 3 |
|
| ZZ | Error Number |
|
| 0 | Unsupported memory |
|
| 1 | Unrecognized memory |
|
| 3 | Failed RAM test |
|
|
|
| |
54.X PRINTER | An error has occurred where X is | Clear the error by turning the | |
ERROR | indicated below. | printer off and then on. If the | |
|
|
| problem persists, call |
| X | Description | HP Support. |
| 1 | Internal power failure |
|
| 2 | Carousel rotation failure |
|
| 3 | Density sensor out of range |
|
| 4 | Optional equipment not |
|
|
| available |
|
| 5 | Waste toner sensor |
|
|
| malfunction |
|
| 6 | OHT sensor malfunction |
|
|
|
|
|
166 Printer control panel messages | EN |