Software application problems
Unable to change system selections through software
Cause | Solution |
|
|
System software changes are locked out by | See Chapter 6 “Printer Interfaces”. Consult |
the printer control panel. | with your network administrator. |
|
|
Your software application does not support | See the documentation for your software |
system changes. | application. |
|
|
The correct printer driver is not loaded. | Load the correct printer driver. |
|
|
The correct application driver is not loaded. | Load the correct application driver. |
|
|
Unable to select a font from the software
Cause | Solution |
|
|
The font is not available in your software | See the documentation for your software |
application. | application. |
|
|
Unable to select colors from the software
Cause | Solution |
|
|
Your software application does not support | See the documentation for your software |
color. | application. |
|
|
Color mode is not selected in your software | Select color mode instead of grayscale or |
application or printer driver. | monochrome mode. |
|
|
The correct printer driver is not loaded. | Load the correct printer driver. |
|
|
Printer driver does not recognize Tray 3 or the Duplex Printing Accessory
Cause | Solution |
|
|
The printer driver has not been configured to | See the online Help for the printer driver for |
recognize Tray 3 or the duplex printing | instructions on how to configure the driver to |
accessory. | recognize printer accessories. |
|
|
The accessory may not be installed. | Verify that the accessory is properly installed. |
|
|
214 Solving problems with the printer | EN |
