![](/images/new-backgrounds/1333007/333007365x1.webp)
Clearing jams in the rear door areas
1 |
2 |
3 |
4 |
WARNING!
Do not touch the fuser: it is hot and could cause burns! The fuser’s operating temperature is 190° C (374° F). Wait 30 minutes to allow the fuser to cool down before touching the fuser.
1If the duplex printing accessory is installed, open the rear duplex cover.
2Open the upper rear door.
3Inspect the upper paper path area inside the rear door and remove any jammed or torn media.
4Open the fuser door and remove any media.
182 Solving problems with the printer | EN |