Erratic, missing characters or interrupted printout
Problem | Solution |
|
|
The interface cable is of poor quality. | Try using a different, |
| compliant cable. Parallel cables can be no |
| longer than 10 meters (30 feet). |
|
|
The interface cable is loose. | Disconnect and reconnect the interface cable. |
|
|
The interface cable is damaged or bad. | Try using a different interface cable. |
|
|
The power cable is loose. | Disconnect and reconnect the power cable. |
|
|
You are attempting to print a PCL job with the | From the printer control panel, select the |
printer configured for PostScript Emulation. | correct printer personality and then resend the |
| print job. |
|
|
You are attempting to print a PostScript job | From the printer control panel, select the |
with the printer configured for PCL. | correct printer personality and then resend the |
| print job. |
|
|
Partial printout
Problem | Solution | |
|
|
|
A memory error message appears on the | 1) | Free up printer memory by deleting |
printer control panel. | unneeded downloaded fonts, style sheets, and | |
| macros from printer memory; or | |
| 2) | Add more memory to the printer. |
|
| |
The file you are printing contain errors. | Check your software application to verify that | |
| the file does not contain errors. To do so: | |
| 1) | Print another file that you know is |
| from within the same application; or | |
| 2) | Print the file from another application. |
|
|
|
EN
Chapter 9 213
