Chapter 2

(continued)

Label Description

3Tray extender

4Paper-width guide

5Print cartridge door

6Glass

7Lid backing

8Rear access door

9Rear USB port

10Power connection*

*Use only with the power adapter supplied by HP.

Control panel buttons

overview One-in-All HP

Label

Icon

Name and Description

1

 

 

On: Turns the HP All-in-One on or off. The On button is lit when the HP All-

 

 

 

in-One is powered on. The light blinks while performing a job.

 

 

 

When the HP All-in-One is off, a minimal amount of power is still used by the device. To completely disconnect the power supply to the HP All-in-One, turn the device off, and then unplug the power cord.

CAUTION: Before you unplug the power cord, you must press the On button and allow the HP All-in-One to turn itself off. This prevents the print cartridges from drying out.

2

Check Print Cartridge lights: Indicates the need to reinsert the specified print

 

cartridge, replace the print cartridge, or close the print cartridge door. The

 

Black/Photo light indicates that the problem is with the black or photo print

10 HP All-in-One overview