Troubleshooting

Chapter 12

Scan errors

Unable to print

Product might not be correctly installed

Product was not found

Product could not find available scan destinations

Required software component was not found or was incorrectly installed

Error occurred while communicating with the product

Door open

Solution: Close the print cartridge door.

Cause: The print cartridge door was open.

Firmware revision mismatch

Solution: To find support and warranty information, go to the HP Web site at www.hp.com/support. If prompted, choose your country/region, and then click Contact HP for information on calling for technical support.

Cause: The revision number of the product firmware does not match the revision number of the software.

Mechanism error

Try the following solutions to resolve the issue. Solutions are listed in order, with the most likely solution first. If the first solution does not solve the problem, continue trying the remaining solutions until the issue is resolved.

Solution 1: Check for a paper jam

Solution 2: Make sure the print carriage is not blocked

Solution 1: Check for a paper jam

Solution: Clear the paper jam.

For more information, see:

Clear paper jams

Cause: The product had a paper jam.

If this did not solve the issue, try the next solution.

136 Troubleshooting

Page 139
Image 139
HP F2200 manual Door open, Firmware revision mismatch, Mechanism error, Solution 1 Check for a paper jam