(continued)

On light

On

On

Blinking

Blinking

Paper light

Blinking

Blinking

Blinking

Blinking

Check Paper

Print Type Cartridge lights light

Blinking

1

On,

 

1

Off

 

 

 

Blinking

 

Both

 

 

blinking

Blinking

Both off

Blinking

Both

 

blinking

Descriptio

 

Solution

n

 

 

 

 

 

 

 

 

HP All-in-

 

 

 

One.

 

 

 

 

 

 

 

 

The print

 

1.

Remove the black print

cartridge

 

 

cartridge.

might be

 

2.

Close the print cartridge

defective.

 

 

door.

 

 

 

3.

Check the On light.

 

 

 

 

If the On light blinks,

 

 

 

 

replace the tri-color

 

 

 

 

print cartridge.

 

 

 

 

If the On light remains

 

 

 

 

steadily lit, replace

 

 

 

 

the black print

 

 

 

 

cartridge.

 

 

 

 

 

The print

 

Open the print cartridge door,

carriage is

 

and check that the carriage is

stalled.

 

 

not blocked.

The control

 

1.

Turn the HP All-in-One

panel

 

 

off.

overlay is

 

2.

Attach the control panel

not

 

 

overlay using the

attached or

 

 

instructions in the Setup

is not

 

 

Guide.

attached

 

3.

Turn the HP All-in-One

properly.

 

 

 

back on.

 

 

 

 

 

 

 

 

Scanner

 

Turn the HP All-in-One off,

failure

 

then on again.

 

 

 

If the problem persists,

 

 

 

contact HP customer support.

 

 

 

 

 

The HP All-

 

1.

Turn the HP All-in-One

in-One has

 

 

off.

a fatal error.

 

2.

Unplug the power cord.

 

 

 

3.

Wait a minute, then plug

 

 

 

 

the power cord back in.

 

 

 

4.

Turn the HP All-in-One

 

 

 

 

back on.

 

 

 

If the problem persists,

 

 

 

contact HP Support.

 

 

 

 

 

Troubleshooting

Product messages

The following is a list of product-related error messages:

Door open

Firmware revision mismatch

Mechanism error

Memory is full

Errors 135

Page 138
Image 138
HP F2200 manual Product messages