Load originals

NOTE: The ADF capacity is up to 30 sheets of 80 g/m2 or 20 lb media.

CAUTION: To prevent damage to the product, do not use an original that contains correction tape, correction fluid, paper clips, or staples. Also, do not load photographs, small originals, or fragile originals into the ADF.

1.Insert the top-end of the stack of originals into the ADF input tray, with the media stack face-down and the first page to be copied at the bottom of the stack.

2.Make sure that the ADF media lever is set correctly for single-page or multiple-page documents.

3.Slide the stack into the ADF until it does not move any farther.

Document loaded appears on the control-panel display.

4.Adjust the media guides until they are snug against the media.

58 Chapter 8 Copy

ENWW

Page 68
Image 68
HP M1300 manual Load originals