3.Close the ADF lid.

Clear jams from the input-tray areas

CAUTION: Do not use sharp objects, such as tweezers or needle-nose pliers, to remove jams. Damage caused by sharp objects will not be covered by the warranty.

When removing jammed media, pull the jammed media straight away from the product. Pulling jammed media out of the product at an angle can damage the product.

NOTE: Depending on where the jam is located, some of the following steps might not be necessary.

1.Open the print-cartridge door.

2.Do one of the following:

If media is visible, use both hands to grasp the side of the media that is most visible (this includes the middle), and carefully pull it free from the product.

If no media is visible, remove the print cartridge, and rotate the upper media guide. Carefully pull the media up and out of the product.

ENWW

Clear jams 143

Page 153
Image 153
HP M1300 manual Clear jams from the input-tray areas