HP M1300 Manual dial faxing, Dial manually from the handset, Redial manually

Manual dial faxing

Usually, the product dials after you press Start Fax. At times, however, you might want the product to dial each number as you press it. For example, if you are charging your fax call to a calling card, you might need to dial the fax number, wait for the acceptance tone of your telephone company, and then dial the calling card number. When dialing internationally, you might need to dial part of the number and then listen for dial tones before continuing to dial.

Dial manually from the handset

1.Load the document into the ADF.

2.Call the recipient on the handset.

3.When the recipient is ready, press Start Fax on the product control panel.

Send a fax to a group manually (ad hoc faxing)

Use the following instructions to send a fax to a group of recipients that has not been assigned a group- dial entry:

1.Load the document into the automatic document feeder (ADF) input tray.

2.Use the alphanumeric buttons.

-or-

If the fax number that you are calling has been assigned a speed-dial entry, press Phone Book, use the alphanumeric buttons to specify the speed-dial entry, and then press OK.

3.Press OK.

4.To continue dialing numbers, repeat steps 2 and 3.

-or-

If you are finished dialing numbers, go to the next step.

5.Press Start Fax.

6.If you have more pages to scan, press 1 to select Yes, and then repeat step 5 for each page of the fax job.

-or-

If you are finished, press 2 to select No.

The product sends the fax to each fax number. If a number in the group is busy or does not answer, the product redials that number based on the redial setting. If all redial attempts fail, the product updates the fax activity log by adding the error, and then it proceeds to the next number in the group.

Redial manually

1.Load the document into the automatic document feeder (ADF) input tray.

2.On the control panel, press Redial.

ENWW Use fax 101