HP M1300 manual Fax memory full Canceling recv, Fax memory full Canceling send, Fax recv. error

Table 10-1Alert and warning messages (continued)

Control panel message	Description	Recommended action
		Check that you are dialing the correct fax
		number.
		Check for a dial tone on the phone line by
		pressing Start Fax.
		Make sure that the phone is working by
		disconnecting the product, plugging in a
		telephone to the phone line, and making a
		voice call.
		Plug the product phone cord into a jack for
		another phone line, and try sending the fax
		again.
		Try a different phone cord.
		If the error persists, contact HP. See
		www.hp.com/support/ljm1319 or the support
		flyer that came in the product box.
Fax memory full Canceling recv.	During the fax transmission, the product ran	Print all of the faxes, and then have the
	out of memory. Only the pages that fit into	sender resend the fax. Have the sender
	memory will be printed.	divide the fax job into multiple jobs before
		resending. Cancel all fax jobs or clear the
		faxes from memory. See Delete faxes from
		memory on page 98.
Fax memory full Canceling send	During the fax job, the memory filled. All	Print all received faxes or wait until all
	pages of the fax have to be in memory for a	pending faxes are sent.
	fax job to work correctly. Only the pages that	Ask the sender to send the fax again.
	fit into memory were sent.
		Cancel all fax jobs or clear the faxes from
		memory. See Delete faxes from memory
		on page 98.
Fax recv. error	An error occurred while trying to receive a fax.	Ask the sender to resend the fax.
		Try faxing back to the sender or another fax
		machine.
		Check for a dial tone on the phone line by
		pressing Start Fax.
		Check that the telephone cord is securely
		connected by unplugging and replugging the
		cord.
		Make sure that you are using the telephone
		cord that came with the product.
		Make sure that the phone is working by
		disconnecting the product, plugging in a
		telephone to the phone line, and making a
		voice call.
		Decrease the fax speed. See Change the fax
		speed on page 116. Ask the sender to
		resend the fax.
		Turn off error-correction mode. See Set the
		fax-error-correction mode on page 115. Ask
		the sender to resend the fax.

110 Chapter 10 Fax ENWW