Change fax settings
Set the
Control the volume of the fax sounds from the control panel. You can make changes to the following sounds:
●The fax sounds that are associated with incoming and outgoing faxes
●The ring for incoming faxes
The
Set the alert volume
1.Press Setup.
2.Use the arrow buttons to select System setup, and then press OK.
3.Use the arrow buttons to select Volume settings, and then press OK.
4.Use the arrow buttons to select Alarm volume, and then press OK.
5.Use the arrow buttons to select Off, Soft, Medium, or Loud.
6.Press OK to save the selection.
Set the
Complete the following steps to change the
1.Press Setup.
2.Use the arrow buttons to select System setup, and then press OK.
3.Use the arrow buttons to select Volume settings, and then press OK.
4.Use the arrow buttons to select Phoneline volume, and then press OK.
5.Use the arrow buttons to select Off, Soft, Medium, or Loud.
6.Press OK to save the selection.
Set the ring volume
When the product is initially receiving a call, a ring alert is audible. The ring duration length is based on the local telephone company
1.Press Setup.
2.Use the arrow buttons to select System setup, and then press OK.
3.Use the arrow buttons to select Volume settings, and then press OK.
4.Use the arrow buttons to select Ring volume, and then press OK.
5.Use the arrow buttons to select Off, Soft, Medium, or Loud.
6.Press OK to save the selection.
86 Chapter 10 Fax | ENWW |